JSW Hot melt adhesive for navigator

详情描述：

Jsw-Hot melt adhesive for navigator has a wide range of applications and can be used to bond a variety of materials, including some difficult to stick plastics Fast adhesive speed, high production efficiency, very suitable for automatic flow operation. Hot melt adhesive for navigator can achieve reliable bonding for thin and narrow structural parts. The touch screen and frame shall not be damaged during repair. Gluing process: preparation of dispensing procedure → dispensing → assembly → cold pressing (4-10 seconds) → pressure maintaining (15-20 minutes) → transfer to the next process → quality inspection of finished products. Hot melt adhesive for navigator repair process: locally press the workpiece to be removed (about 80-140 ℃) → separate the bonding surface with external force. No bad, use industrial alcohol to remove residue. Then return to the gluing process. Advantages of Hot melt adhesive for navigator: the adhesive has the characteristics of rapid curing, which is very suitable for assembly line production, high yield, convenient repair, repair will not damage TP and surface shell.
The above is a brief introduction of Hot melt adhesive for navigator. For detailed data, please go to the download window of jinshengwei official website. The following is the informal information of Hot melt adhesive for navigator for reference only.

When Hot melt adhesive for navigator samples are provided, detailed descriptions of their properties will be provided, which is undoubtedly beneficial to the practitioners of adhesive bonding process. For electronic windows and digital product screens, it is usually required that the adhesive does not corrode copper and other component materials under the conditions of use or storage. Hot melt adhesive for navigator can be cured only with the participation of moisture in the air, except for special and special purpose glass adhesives (such as anaerobic adhesives). Therefore, if the place where you want to construct is a closed space and extremely dry, Hot melt adhesive for navigator will not be competent. Hot melt adhesive for navigator requires that the surface of the bonded substrate must be clean and free from other attachments (such as dust, etc.), otherwise the glass and the bracket will not adhere firmly or fall off after curing.

JSW Company Closely Focuses on Difficulties in Enterprise Production and Management to Carry out Scientific and Technological Research. The Hot melt adhesive for navigator dispensing process at 110℃ under complex conditions was successfully solved, and the permit to participate in domestic and international market competition was truly obtained. This is what ——JSW Company, once a little-known Taiwan joint-stock enterprise, loudly put forward the slogan of "creating a positive, creating a real Hot melt adhesive for navigator brand" and put the slogan into practice, insisting on guiding the enterprise to approach the scientific and technological territory with innovative consciousness, actively advocating the corporate culture of "environmental protection, concentration and harmony", and continuously developing new Hot melt adhesive for navigator products. Through long-term unremitting efforts, the products are popular in Southeast Asian markets. The Hot melt adhesive for navigator technology has reached a new level, greatly shortening the gap between China and developed countries in technology and quality of glue products.

Therefore, when Hot melt adhesive for navigator was produced in the first step, the first batch of products were created around a narrow border system, which was also a good opportunity for JSW. Therefore, the first function of Hot melt adhesive for navigator at that time was to apply glue dispensing technology to narrow border mobile phones with small lines. This was Hot melt adhesive for navigator produced in the first step, and it took several years before various applications began slowly. Therefore, for Hot melt adhesive for navigator innovation factory, project investment was found. In fact, according to the development of Hot melt adhesive for navigator industry, enterprises have not only failed to promote their growth, so Hot melt adhesive for navigator has been sticking to the road of quality and winning by sticking to quality for so many years.