首页 热熔胶 615 hot melt film

615 hot melt film

发布时间 2019-12-09 收藏 分享
价格 4600.00
品牌 JSW
区域 全国
来源 东莞市台茂电子材料有限公司

详情描述:

Jsw-615 hot melt film instructions: Please empty a small section of glue before dispensing. Heat melt the jsw3542615 hot melt film at a constant temperature of 110 ℃, apply the adhesive to the part to be bonded with the dispensing equipment, complete the bonding within 2 minutes, and maintain the pressure in the fixed tool for 10-20 minutes before moving to the next position. It is not recommended to heat each 615 hot melt film continuously for more than three hours. The same 615 hot melt film cannot be heated three times. Heating for a long time will make the rear part of the rubber tube touch the air temperature and form a crust, which can be pierced to reduce the glue pressure.

The above is a brief introduction of 615 hot melt film. For detailed data, please go to the download window of jinshengwei official website. The following is the informal information of 615 hot melt film for reference only.


615 hot melt film manufacturer JSW company official told reporters that in 2014, the output of adhesive was 148 tons, with the output increasing by 10.8% and sales increasing by 9.6%. In the next few years, the market space of 615 hot melt film in China is still very large. Among them, the annual growth rate of mobile phone TP screen and flat panel computer widescreen is expected to be 4% ~ 5%, and the annual growth rate of 615 hot melt film combined with high-tech products is expected to be 7% ~ 8%. The higher demand of the handheld electronic window industry for 615 hot melt film product features and new functions will promote the in-depth development of the domestic digital product industry. At present, the market is very optimistic about the 615 hot melt film market. Some test strips and consumables used in the medical industry cannot be separated from 615 hot melt film, while the bonding materials used in the electronic industry are mainly in the bonding of windows such as narrow frames and TP screens, including watches, visual door bells, tablet computers, mobile phones, etc.


However, there is no specific evaluation system for how much weight each of the six factors involved in the development potential of 615 hot melt film brand mentioned in it and how to estimate them. All of them comprehensively consider the enterprise factors, consumer factors and macro factors, but the combination and classification of various factors are different. Considering the operability of 615 hot melt film research, we tend to adopt Xu Jinan's point of view when analyzing the composition of 615 hot melt film brand competitiveness, and divide the brand competitiveness into enterprise brand market capability, enterprise 615 hot melt film brand management capability and enterprise brand foundation capability.


Some 615 hot melt film brand goals are only transitional, that is, to create a brand is only to create momentum temporarily, and the ultimate goal of the enterprise may be the unified image of the entire 615 hot melt film enterprise rather than just a product brand. Some brand goals are long-term, that is, the establishment of a brand will promote the development of 615 hot melt film enterprises for a long time. Such as JSW brand is a long-term brand, 615 hot melt film brand goal setting process for resource analysis. First of all, it is necessary to identify the 615 hot melt film products and services that JSW has been relatively successful at present, list the major markets and customer groups it serves, find out the key driving forces that affect the service market and products, determine the 615 hot melt film fields that support the driving forces, and determine the core values that will guide the organization in the future.


联系人 洪梅
13692231367 554826859
shing.wai@163.com
上一条 下一条
电话联系