高品质全自动辊压筋电缆桥架冷弯机

详情描述：

设备技术要求
Equipment technical requirements
设备技术条件：
Equipment technical conditions:
设备占地面积： 45?3.5?5（长?宽?高）米。
Equipment cover an area of an area: 45 * 3.5 * 5 meters (length x width x height).
设备进料方向：左进右出(待定)。
Equipment: feed direction left to right (pending).
电压参数380，50Hz，3相。
Voltage parameter 380, 50 Hz, 3 phase.
气源：流量为0.5m3/分钟；
Source: the flow of 0.5 m3 / min;
压力为0-0.6MPa。
Pressure to 0-0.6 MPa.
液压油：46#液压油。
The hydraulic oil: 46 # hydraulic oil.
齿轮油：18#双曲线齿轮油。
Gear oil: 18 # hyperbolic gear oil.
设备颜色：蓝色为主，传动部位及防护盖等采用红色或黄色等警示色调
Equipment color: blue is given priority to, transmission parts and protective cover, such as red or yellow warning tone
产品尺寸及冲筋（开模）以双方签字确认的图为准。
Product size and screed (mould) with figure of confirmation signed by both sides.
设备主要技术参数
Equipment main technical parameters
轧制带钢宽度：200—1050 mm
Rolling steel strip width: 200-1050 mm
轧制带钢厚度：0.7~2.0 mm
Rolling steel strip thickness: 0.7 ~ 2.0 mm
轧制带钢材质：Q235冷轧带钢
Rolling steel strip material: Q235 cold-rolled strip steel
在线冲孔、生产速度：2-4m/分钟
online punching and production speed: 2-4 m/min
轧制工件长度：2000—6000 mm
Rolling workpiece length: 2000-6000 mm
电机防爆等级ExfIICT4
ExfIICT4 explosion-proof motor level
电机防护等级IP55
Motor protection grade IP55
设备装机总容量：约73KW。
Equipment installed gross capacity: 73 kw.
轧制产品范围
The product range of rolling
本冲压成型机组可以轧制大厚度为2mm槽盒式和托盘式电缆桥架，产品宽度从100至600mm，高度从50至200mm,共计多种不同规格的钢质电缆桥架产品。
The stamping forming unit can be rolling thickness is 2 mm slot box and tray type cable tray, products from 100 to 600 mm in width, and height from 50 to 200 mm in a variety of different specifications of the steel cable tray products.
设备技术要求
Equipment technical requirements
设备技术条件：
Equipment technical conditions:
设备占地面积： 45?3.5?5（长?宽?高）米。
Equipment cover an area of an area: 45 * 3.5 * 5 meters (length x width x height).
设备进料方向：左进右出(待定)。
Equipment: feed direction left to right (pending).
电压参数380，50Hz，3相。
Voltage parameter 380, 50 Hz, 3 phase.
气源：流量为0.5m3/分钟；
Source: the flow of 0.5 m3 / min;
压力为0-0.6MPa。
Pressure to 0-0.6 MPa.
液压油：46#液压油。
The hydraulic oil: 46 # hydraulic oil.
齿轮油：18#双曲线齿轮油。
Gear oil: 18 # hyperbolic gear oil.
设备颜色：蓝色为主，传动部位及防护盖等采用红色或黄色等警示色调
Equipment color: blue is given priority to, transmission parts and protective cover, such as red or yellow warning tone
产品尺寸及冲筋（开模）以双方签字确认的图为准。
Product size and screed (mould) with figure of confirmation signed by both sides.
设备主要技术参数
Equipment main technical parameters
轧制带钢宽度：200—1050 mm
Rolling steel strip width: 200-1050 mm
轧制带钢厚度：0.7~2.0 mm
Rolling steel strip thickness: 0.7 ~ 2.0 mm
轧制带钢材质：Q235冷轧带钢
Rolling steel strip material: Q235 cold-rolled strip steel
在线冲孔、生产速度：2-4m/分钟
online punching and production speed: 2-4 m/min
轧制工件长度：2000—6000 mm
Rolling workpiece length: 2000-6000 mm
电机防爆等级ExfIICT4
ExfIICT4 explosion-proof motor level
电机防护等级IP55
Motor protection grade IP55
设备装机总容量：约73KW。
Equipment installed gross capacity: 73 kw.
轧制产品范围
The product range of rolling
本冲压成型机组可以轧制大厚度为2mm槽盒式和托盘式电缆桥架，产品宽度从100至600mm，高度从50至200mm,共计多种不同规格的钢质电缆桥架产品。
The stamping forming unit can be rolling thickness is 2 mm slot box and tray type cable tray, products from 100 to 600 mm in width, and height from 50 to 200 mm in a variety of different specifications of the steel cable tray products.